whetheperfect.blogg.se

If another operator is monitoring the repeater in promiscuous mode (she can hear all traffic on one or both slots), at least one side of the conversation will be heard.Instead of using the talkgroup ID, you use the DMR operator's DMR ID (see "adding a talkgroup" above). A "private call" is where you are using the repeater system to directly contact another DMR operator.The destination radio will also go into a private call mode (NOTE: I've only tested between Anytone radios).It will stay that way until you change the channel or power cycle the radio. The current group is then set to that person's ID. Highlight the person that you want to begin a Private Call with and press the PTT.Highlight "Call Log" and select it (using the green button).If you want to open a private call with someone that you you've recently heard on the radio, there is an easier way to do that. You'll notice the override no longer works. Press the PTT when you are done to confirm you did it right (by looking at the talk group ID during transmit), then turn the knob right one, and left one, to come back and then press the PTT again. Note: There is a YouTube video HERE on doing the upgrade. You will now need to reprogram the radio with the code plug you saved in step.I did a factory reboot by turning the radio off and then back on by pressing the PTT and the PF1 (right under the PTT) and then turning it on while doing that.The instructions recommend you do a factory reset (erases all data).Red light blinks differently but I didn't notice Open the update you want to install (click the "Open Update File).The red light should flash and the screen is blank